-
ABOUT US
-
CONTACT US
BLOG
We look forward to meeting you at the event, let's talk about your current needs.
What is a two-speed mixer like? How to maintain it daily?
Release time：
2025-04-14
A twin-speed mixer is a typical mixing device. Using a twin-speed mixer to mix materials can achieve good mixing and uniform effects. Mixers are common in both industrial and civil fields, but regardless of their use, their working principles and structural forms are similar.
A two-speed mixer is a typical mixing device. Using a two-speed mixer to mix materials can achieve good mixing and uniform effects. Mixers are common in both industrial and domestic fields, but regardless of their use, their working principles and structural forms are similar.
To avoid damage to the forming ring in the mixer shaft sleeve, first fill the snap ring groove with raw materials, then assemble the shaft sleeve and the dynamic ring seat together, and use a special pipe to snap the snap ring into place. The mixer device needs to install the dynamic ring after the O-ring of the dynamic ring. It should be noted here that the dynamic ring of the device should be aligned with the concave and convex points and enter the static ring device of the mixer together.
Install the static ring pressure plate, then insert the shaft support in reverse, then fix it with special bolts, then rotate the shaft slowly counterclockwise with pipe pliers to press the shaft into place, then press the shaft support back to its original position; then use special bolts to press the shaft support back into it, then press the shaft support back into it, then press the shaft support back into it.
We can perform daily maintenance of the mixer as follows:
The operational stability of the two-speed mixer. Even if the mixer is highly efficient, but the stability is insufficient and the failures are frequent, it is not feasible. No one wants to see production losses and additional investment caused by downtime, so the application of accessories such as the two-speed mixer motor and transmission device should be considered here.
A chemical two-speed mixer is simply a two-speed mixer made in a chemical plant, and the biochemical solution in which the mixture is oxidized by air is also an expensive processing stage in the internal system software of the mixer.
Generally, it takes 6-8 hours for a two-speed mixer manufacturer of general mechanical equipment to solve the problem of chemicals inside the two-speed mixer. However, the oxygen concentration utilization rate shown by the air compressor in the two-speed mixer is only a few percent of the two-speed mixer itself. A large amount of electromagnetic energy is wasted in the two-speed mixer equipment, resulting in a huge volume of mechanical equipment in the hydrolysis acidification pool of the two-speed mixer and a huge investment in the components of the internal system software of the two-speed mixer, causing problems such as incomplete absorption and digestion of materials and uneven mixing in the two-speed mixer. The main reasons are as follows:
Due to the continuous increase in the cost of raw materials and electricity for the mixing structure and components of the two-speed mixer equipment, the mixer operators' chemicals and the internal system software of the mixer must be extensively and thoroughly improved based on the improvement of energy efficiency. Therefore, the improvement of the mixer system software and mixer technology in the mixer field and the improvement of the mixer mixing cost are very important.
Previous
Address: No. 9, Xinyuan Road, Qianzhou Industrial Park, Wuxi City
Tel: +86-510-83383966
Tel: +86-13706183972 Manager Xu
Tel: +86-514-84380409
Email: topchina2003@top-mixer.com
Email: Rose.xu@top-mixer.com
